Vibronic point level switch for overfill prevention or pump protection in liquids.

Price
$255.90 USD
Stock
20 In Stock

The Liquiphant FTL31 is a vibronic point level switch for liquids. The device is used for overfill prevention or pump dry-run protection in cleaning systems. The measurement is not affected by conductivity, build-up, turbulence, flow or air bubbles and does not require calibration. The optional IO-Link capability allows easy and time-saving configuration.

Key Benefits

  • The FTL31 works in areas where other measuring principles are not suitable due to conductivity, build-up, turbulences, flow conditions or air bubbles.
  • Smallest vibronic sensor on the market.

Configuration

AAApproval:Non-hazardous area
MElectrical Connection:Plug M12, IP65/67 NEMA Type 4X Encl.
4Power Supply; Output:10-30VDC; 3-wire PNP
WBJProcess Connection:Thread ISO228 G1/2, 316L
2Sensor Design:Max. process temperature 100oC/212oF
AASensor Type:Compact version 316L Ra<3.2um/126uin

Certificate and approvals device / transmitter

Approval for general usage

  • CE mark

Function and system design

Measuring principle

  • Vibronic measurement

General information

Measuring task

  • Point level

General explosion-protection information

  • Information about currently available Ex versions (ATEX, FM, CSA, TIIS, IECEx, NEPSI, etc.) can be supplied by your E+H Sales Center on request. All explosion protection data are given in a separate documentation which is availabe upon request.

Identification

Manufacturer name

  • Endress+Hauser

Vendor

  • Endress+Hauser

Identification / Product device / transmitter

Product type

  • Point level switch

Product name

  • Liquiphant FTL31

Order code

  • FTL31-1102/0

Extended order code

  • FTL31-AA4M2AAWBJ

Input characteristics / Measurement channels

Measured variable

  • Level

Input characteristics / Measurement channels / Measuring range liquid

Lower range-limit

  • 0.7 g/cm3

Mechanical construction / Connection housing / head

Degree of protection, NEMA

  • NEMA Type 4X Enclosure

Degree of protection, Europe

  • IP65/67

Mechanical construction / Connection housing / head / Cable entry signal line

Plug-in

  • M12

Mechanical construction / Process connection

Type of connection

  • Thread

Surface roughness wetted parts (µm)

  • 3.2 µm

Reference Standard for connection

  • ISO228

Nominal diameter

  • G1/2

Material process connection based on EN/DIN

  • 1.4404 / 1.4435

Material gasket

  • FA

Type of gasket

  • Flat gasket

Mechanical construction / Vibration switch sensing element

Probe design

  • Compact

Fork length in mm

  • 38.0 mm

Operating frequency

  • 1100.0 Hertz

Material sensor wetted part based on AISI

  • 316L

Operating conditions / Environment

Ambient temperature °C min.

  • -40.0 °C

Ambient temperature °C max.

  • 70.0 °C

Storage temperature °C min.

  • -40.0 °C

Storage temperature °C max.

  • 85.0 °C

Climate class

  • DIN EN 60068-2-38/IEC 68-2-38: test Z/AD

Vibrational resistance

  • a(RMS) = 50 m/s², ASD = 1.25 (m/s²)²/Hz, f = 5 to 2000 Hz, t = 3 x 2 h

Electromagnetic compatibility

  • of the EN 61326 series and NAMUR recommendation EMC (NE21).

Operating conditions / Process conditions

Process pressure in bar min.

  • -1.0 bar

Medium density min.

  • 0.7 g/cm3

Viscosity max. (dynamic)

  • 10000.0 m.Pa/s

Viscosity min. (dynamic)

  • 1.0 m.Pa/s

Output characteristics / Binary Output (open collector, electronic)

Output type

  • Binary Output (open collector, electronic)

Type

  • PNP

Power supply / Power input circuit

Supply mode

  • 3 wire

Voltage type

  • DC voltage

Supply voltage DC min.

  • 10.0 V

Supply voltage DC max.

  • 30.0 V

Power consumption max.

  • 975.0 mW

Residual ripple

  • 5 Vss 0 to 400 Hz

Specifications

Point Level / Liquids

Characteristic / Application

  • Level switch for liquids and is used in tanks, vessels
  • and pipes.

Supply / Communication

  • 20 ... 253V AC/DC, 2-wire
  • 10 ... 30V DC-PNP 3-wire

Ambient temperature

  • -40 °C ... 70 °C
  • (-40 °F ... 158 °F)

Process temperature

  • -40 °C ... 150 °C
  • (-40 °F ... 302 °F)

Process pressure / max. overpressure limit

  • Vacuum ... 40 bar
  • (Vacuum ... 580 psi)

Min. density of medium

  • >0,7g/cm³
  • (>0,5g/cm³ optional)

Main wetted parts

  • 316L

Process connection

  • Threads:
  • G1/2, G3/4, G1, MNPT1/2, MNPT3/4, MNPT1, R1/2, R3/4, R1

Communication

  • AC/DC, DC-PNP

Certificates / Approvals

  • CSA C/US, EAC

Safety approvals

  • Overfill protection WHG
  • Leakage

Design approvals

  • EN 10204-3.1

Marine approval

  • ABS/ LR/ BV/ DNV

Options

  • Adjustment switching delay
  • Cleaned from oil+grease,
  • PWIS free
show more