Series PDWS Paddlewheel Flow Sensor

Brand: Dwyer Instruments, LLC

The Series PDWS Insertion Paddlewheel Flowmeters are designed for pipe size ranges from 1/2 to 8˝ with available materials of brass, stainless steel, PVC, and polypropylene.

The Series PDWS is intended to be used with the Series PWF, a wide variety of custom tee, saddle, or welded fittings that come in bronze, PVC, and stainless steel.

PRINCIPLE OF OPERATION
Uses the rotation of an impeller to measure flow. Liquid flow pushes the rotor and the rotation is detected by a Hall-effect sensor.

The output is a current sinking pulse signal that can be connected to the Series RTI to display flow rate and total, or to the Series BAT for a 4 to 20 mA analog signal.
Features
  • The bearings are made from ruby jewel to reduce the coefficient of friction and maintain high accuracy
  • PVC and polypropylene body material offers resistance against corrosive media

Specifications

Accuracy

  • ± 1.5 % of Full Scale

Bearing Material

  • Ruby Jewel

Electrical Connectors

  • 22 AWG 18” (5.5 m) 3-Conductor Cable, Max.

Environmental Protection

  • IP66
  • NEMA 4X

Flow Rate

  • Liquids: 0.09 to 9.14 mps (0.3 to 30 FPS)

Media

  • Compatible Clean Liquids

O-Ring Material

  • Ethylene Propylene (EPR)
  • Fluoroelastomer

Operating Temperature - Sensor

  • 55° C (130° F)
  • 93° C (200° F)

Output

  • 4-20 mA
  • Current Sinking
  • Opto-Isolated
  • Square Wave Pulse

Power Requirement

  • 2 mA - Max.
  • 6-24 Vdc

Pressure Range

  • bar: 12 to 28
  • kPa: 1,200 to 2,800
  • psi: 175 to 400

Sensor / Probe Material

  • 316 Stainless Steel
  • Brass
  • Polypropylene
  • PVC

Shaft Material

  • Ceramic
  • Tungsten Carbide

Wetted Materials

  • PVDF

  • Industrial Water & Wastewater Treatment
  • Cooling Water Monitoring
  • Industrial Fluid Control
  • Chemical Proportioning
  • Fluctuating Fluid Conductivity Applications
show more