Images are representations only.
8647 AirLINE SP ElectroPneumatic Automation System
Brand: Burkert Fluid Control Systems
The pneumatic valve island, Type 8647 AirLINE SP, is a modular, electropneumatic automation system consisting of connection modules and valve modules. It is perfectly designed for safe and complete integration into the decentralized peripheral system "SIMATIC ET 200SP" from Siemens.
Type 8647 is used to integrate pneumatic pilot valves directly into the SIMATIC ET 200SP and to control them via the ET 200SP.
Pneumatically actuated process valves, pneumatic cylinders or other pneumatic components can be connected to the pneumatic outputs. If the pneumatic components are installed with digital feedbacks, the position of the actuated pneumatic components can be displayed on the associated pilot valve. This can save time on commissioning and maintenance.
Features
- Direct connection to the I/O-System SIMATIC ET 200SP
- Combination of fieldbus, pilot valves and I/O modules
- Easy diagnosis by LC-Display
- Safety related shut-off of valves possible
Specifications
Body Material
- PA, PC, PPS, Aluminum
Seal Material
- NBR (valves: FPM, NBR and PUR)
Nominal Power
- 0.8 W
Ambient Temperature
- 0° to 55° C (32° to 131° F)
Storage Temperature
- -20° to 60° C (-4° to 140° F)
Pressure Range
- bar: Vac. to 10
- kPa: Vac. to 1,000
- psi: Vac. to 145
Operating Voltage
- 24 Vdc
Voltage Tolerance
- ± 10 %
Electrical Connection
- Rectangular Plug, 2-pin/3-pin, grid 5.08 mm/2.54 mm Cable with Strands
Flow Rate
- QNn value air: 200 to 300 L/minute
Duty Cycle
- 100% Continuous Operation
Override
- Standard Manual Override
Product Connection
- Working Port: D 6, D 1/4", ALQ
- Air Supply Connection: G 1/4"
- G 1/4", D 3/8"
- Service Port 2 (A), 4 (B): Plug-in Coupling Ø 6 mm, Ø 1/4"
Media
- Oil-free or Lubricated Compressed Dry Air
Communication
- Module: Siemens SIMATIC ET 200SP / SP HA
- Interface: PROFIBUS DP, PROFINET IO
Approvals & Certifications
- ATEX
- IECEx
- cULus
Environmental Protection
- IP20
- IP65
Mounting Position
- Preferably with Actuator Upright
