Images are representations only.
Intrinsically-Safe Hand-Held Pressure Indicator (Ex Version) - CPH62I0
Brand: WIKA Alexander Wiegand SE & Co. KGFor the hand-held pressure indicator model CPH62I0, external reference pressure sensors of model CPT62I0 with measuring ranges of up to 1,000 bar [14,500 psi] are available.
It is therefore particularly suitable as a test instrument for applications such as process engineering, chemical industry, refineries, etc.
Features- Digital indicator with interchangeable pressure sensors (plug-and-play).
- Measuring ranges from 0 ... 100 mbar to 0 ... 1,000 bar (0 ... 1.5 psi to 0 ... 14,500 psi) at positive and negative overpressure, absolute pressure and differential pressure.
- Accuracy: 0.2 %, optional 0.1 % (incl. calibration certificate).
- Intrinsically safe version, II 2G Ex ib IIC T4.
- Software and complete service cases (incl. pumps) available.
Specifications
Measuring Inputs
- 1 Input for CPH62I0-S1
- 2 Inputs for CPH62I0-S2
Sensor Compatibility
- Compatible with model CPT62I0 reference Pressure Sensors
Connection to CPH62I0
- 6-Pin, shielded mini DIN Female Connector with interlocking
Sensor Connection Cable
- Standard: Cable with 6-Pin mini DIN Connector and 7-Pin bayonet Connector, length 1.1 m [3.3 ft]
- Option: Extension cable, length 3.8 m [12.5 ft], overall cable length approximately 5 m [16.4 ft]
Display
- Large 4-1/2-Digit LC display for indication of two Pressure values and additional information
Indication Range
- -19999 ... 19999 Digits (Dependent upon Connected reference Pressure Sensor)
Pressure Types
- Gauge Pressure, Absolute Pressure or vacuum
- Differential Pressure measurement only with CPH62I0-S2, and two model CPT62I0 reference Pressure Sensors Connected
- Dependent upon Connected reference Pressure Sensor:
Pressure Units
- inHg
- mmHg
- MPa
- Pa
- kPa
- Freely selectable depending on the Measuring Range:
- bar
- mbar
- psi
Measuring Rate
- 4/s (“Slo” - slow measurement)
- 1,000/s filtered (“Fast” - fast measurement)
- > 1,000/s unfiltered (“P.det” - peak value detection)
Mean Value Filter
- 1 ... 120 seconds
Data Logger
- Individual value logger ⇒ Up to 99 recordings including time can be accessed via function Button
- Cyclic logger ⇒ automatic recording of up to 10,000 values including time ⇒ Cycle time freely Adjustable in the Range from 1 ... 3,600 seconds
Real-time Clock
- for data logger
Minimum/Maximum Memory
- Minimum or Max. measured value
Hold
- Holding the last measured value
Tare
- Tare or zero point correction
Alarm
- Alarm function ⇒ Min./Max. Alarm (Audible/visual)
Sea Level (barometric Pressure)
- Sea level Adjustment -200 ... +9999 m
Power-Off Function
- Automatic switch-off:
- activated (1 ... 120 minutes)
- deactivated (no automatic switch-off of the instrument)
- Calibration service companies/service industry
- Instrument and control workshops
- Pressure tests
