Images are representations only.
6511 5/2-Way Solenoid Valve
Brand: Burkert Fluid Control Systems
Type 6511 consists of the pilot flipper solenoid valve Type 6144 and a pneumatic seat valve.
The Flipper principle allows switching of high pressures with low power consumption and with short switching times. All valves are equipped with manual override as a standard.
Type 6511 is extendable and preferably with a cable plug at the back of the valve island, Type 8640, and with the plug connection at the front of the valve block in the pneumatic control actuators.
Features
- Compact design
- Fast switching times
- Low power consumption
Specifications
Seal Material
- FKM
- NBR
Body Material
- Polyamide (PA)
- Polyphenylene Sulfide (PPS)
Environmental Protection
- IP40
Media
- Lubricated or Oil- Free Compressed Dry Air
- Neutral Gases (5 μm Filter Recommended)
Medium Temperature
- 0° to 50° C (32° to 122° F)
Switching Time
- Closing: < 10 ms
- Opening: < 15 ms
Duty Cycle
- 100% Continuous Operation
Port Connection
- Flange for MP02
Flow Rate
- Air: 130 QNn (L/min)
Approvals & Certifications
- ATEX
- IECEx
- cURus
Electrical Connection
- Rectangular plug, 2-pin, with raster 5.08 mm
Operating Voltage
- 24 Vdc
Voltage Tolerance
- ± 10 %
Nominal Power
- 0.8 W
Orifice Size
- 0.09" (2.50 mm)
Mounting Position
- Preferably with Actuator Upright
Ambient Temperature
- 0° to 55° C (32° to 131° F)
Pressure Range
- psi: 36.26 to 145 (kPa: 250 to 1,000, bar: 2.5 to 10)
