2873 2/2-Way Solenoid Control Valve

Brand: Burkert Fluid Control Systems

The direct-acting solenoid control valve Type 2873 1.26" (32 mm installation width) is used as the regulating unit in control loops.

Due to an elastomeric seat seal the valve closes tight (integrated shut-off function), up to the DN specific nominal pressure. The plunger of the valve is assembled frictionless, which leads to an extraordinary adjustment characteristic.

This valve is particularly suitable for demanding control tasks (high control range, dry gases, etc.)

Valve control takes place through a PWM signal. The duty cycle of the PWM signal determines the coil current and hence the position of the plunger. Optionally the valve can also be driven with DC voltage.

Features

  • Very good response
  • Compact valve design
  • Excellent range (1:200)
  • Port connection 1/8” (3 mm), 1/4”(6 mm) or sub-base

Specifications

Seal Material

  • EPDM
  • FKM

Body Material

  • Brass
  • Stainless Steel

Port Connection

  • Sub-base, G 1/8", G 1/4", 1/8" NPT, 1/4" NPT

Hysteresis

  • < 5 %

Repeat Accuracy

  • < 0.5 % Full Scale

Response Sensitivity

  • < 0.25 % Full Scale

Setting Range

  • 1:200

Actuating Time (10…90 %)

  • < 20 ms

Duty Cycle

  • 100% Continuous Operation

Orifice Size

  • 0.8 to 4 mm

Pressure Range

  • psi: 0 to 232 (kPa: 0 to 1,600, bar: 0 to 16)

Approvals & Certifications

  • ATEX
  • IECEx
  • UL
  • USP
  • FDA

Operating Voltage

  • 24 Vdc (at 5 W and 24 V coil)

Power Consumption

  • Max 9 W

Maximum Coil Current

  • 420 mA (at 9 W and 24 V coil)

PWM Frequency

  • 1,200 Hz

Media

  • Neutral Gases & Liquids

Medium Temperature

  • -30° to 90° C (-22° to 194° F)

Electrical Connection

  • Cable Plug Typical 2518, form A According to DIN EN 175301-803

Environmental Protection

  • IP65

Flow Rate

  • Water: 0.018 to 0.320 Kvs (m³/hour)

Ambient Temperature

  • 55° C (131° F) - Max.

Mounting Position

  • Preferably with Actuator Upright
show more