Type 100/100M Pressure Regulator

Brand: ControlAir

The Type 100 (and 100M for motorized version) is a high precision, multi-stage pressure regulator.

This pressure controller provides the highest level of regulation accuracy and repeatability available. 

The Type 100/100M is ideal for applications that call for the utmost in control and maximum stability under variable operating conditions.

A stainless steel measuring capsule is used as a sensing element to activate the high gain servo balanced control mechanism in which the main valve is controlled by a pilot valve. 

This allows for greater accuracy and eliminates many of the problems associated with conventional regulators using range springs and diaphragms.
Features
  • Accurate Pressure Regulation
    • Controls output pressure to within 0.1% accuracy. Regulated pressure variation as small as 0.01 psig is self corrected 
  • Stable Output
    • Substantial changes in flow have virtually no effect on regulated pressure from dead end to 12 SCFM. 
  • Dependable Startup
    • Returns the regulated pressure to its original output setting even after long “down time” 
  • High Relief Capacity
    • An optional high flow relief valve provides quick response when regulated pressure is reset to a lower value or when there is a large amount of system back pressure to be relieved 
  • Temperature Stability
    • A stainless steel measuring capsule which activates the servocontrol mechanism minimizes effects on regulated pressure by wide variations in operating temperature. 
  • Locking Capability
    • Locking nut prevents inadvertent pressure adjustment 
  • Output Pressure Range: psig: 0.5 to 120 (bar: 0.03 to 10.3, kPa: 3.4 to 1,034.2) 
  • Supply Pressure (Maximum): psig: 150 (bar: 10.3, kPa: 1,034) 
  • Ambient Temperature: -29° to 71°C (20° to 160°F) 
  • Port Size: 1/8", 1/4", 3/8" 
  • Port Threads: NPT or BSP 
  • Materials of Construction:
    • Body & Housing: Die-cast Zinc Alloy 
    • Diaphragm: Buna N Elastomer and Polyester Fabric 
    • Knob: Phenolic Plastic (100) 

Specifications

Actuator Type

  • Knob Adjust (Plastic)
  • Motorized
  • Tamper-Proof

BSP Connection

  • 1/4” BSP Female
  • 1/8” BSP Female
  • 3/8” BSP Female

Diaphragm Material

  • Buna-N

Enclosure, Body Material

  • Zinc Alloy

Exhaust Capacity - Relieving Units Only

  • 11 scfm (330 NL/minute) with psig: 5 (bar: 0.35, kPa: 35) Set Point - for High Relief Model
  • 15 scfm (450 NL/minute) with psig: 5 (bar: 0.35, kPa: 35) Set Point - for Extra High Relief
  • 3 scfm
  • 3 scfm (90 NL/minute) with psig: 5 (bar: 0.35, kPa: 35) Set Point.
  • psig: 5 (bar: 0.345, kPa: 34.47) Above psig: 20 (bar: 1.379, kPa: 137.9) Set Point

Flow Capacity

  • 14 scfm (420 NL/minute) at psig: 100 (bar: 7, kPa: 700) Supply - psig: 20 (bar: 1.5, kPa: 150) Outlet

Media

  • Air

Mounting

  • Bracket
  • Panel Mount
  • Pipe

NPT Connection

  • 1/4” NPT Female
  • 1/8” NPT Female
  • 3/8” NPT Female

Operating Temperature

  • -29° to 71° C (-20° to 160° F)

Operating Temperature - Electronics

  • -18° to 60° C (0° to 140° F)

Pressure Range

  • bar: 0.03 to 8
  • kPa: 3.4 to 827
  • psig: 0.5 to 120

Relief

  • Non-Relieving
  • Relieving

Sensitivity

  • 1/8” WC (0.32 cm)

Supply Pressure - Maximum

  • bar: 10
  • kPa: 1,034
  • psig: 150

Supply Pressure Effect

  • less Than psig: 0.005 (bar: 0.0003, kPa: 0.03) of psig: 25 (bar: 1.7, kPa: 172)

Vent

  • Straight
  • Tapped Exhaust

  • Air Gauging
  • Air Hoists
  • Calibration Standards
  • Cylinder Loading
  • Diagnostic Controls
  • Gas Mixing
  • Gate Actuators
  • Medical Equipment
  • Microfluidics
  • Precision Fluid Control
  • Roll Loading
  • Valve Operators
  • Ventilators
  • Web Tensioning
show more