Fn-LinkIQ-100_01b_w.png
Images are representations only.

Fluke Networks LinkIQ™ Cable+Network Tester

Brand: Fluke Corporation
Favorite

The LinkIQ™ Cable+Network Tester is the trusted solution to verify cable performance up to 10G and solve network connectivity problems.

LinkIQ™ validates cable performance using frequency-based measurements to calculate maximum bandwidth (10BASE-T to 10GBASE-T), which ensure that tested links meet performance requirements.

LinkIQ™ also performs ping tests to verify connectivity and provides nearest switch diagnostics including advertised data rate, switch name, IP address, port number and VLAN information, plus PoE testing and load test up to Class 8 (90 W). 

Ethernet Alliance PoE Certified for reliable multivendor interoperability.

Additional features include: Cable Toning, Port Blink, Remote Office Locators, and the ability to manage results via LinkWare PC.
Features
  • Validate Cable Performance up to 10GBASE-T via frequency-based measurements
  • Get connected switch data rate, switch name, IP address, port number, and VLAN
  • Detect the PoE class (1-8) and power, and perform a load test
  • Test connectivity to TCP/IP network through IP configuration and ping

Specifications

Brand

Battery

  • Type: Lithium-ion, 3.6 V, 6400 mAh
  • Life: 8 hours typical
  • Charge time: 4.5 hours

Power Adapter

  • Input: 100 to 240 Vac ± 10 %, 50/60 Hz
  • Output: 15 Vdc, 2 A Max.

Host Interface

  • USB type C

Display

  • 800 x 480 color capacitive multi-touch

Operating Temperature

  • 0° C to 45° C

Vibration

  • Random, 2 g, 5 Hz-500 Hz

Diagnostic Protocols

  • Link Layer Discovery Protocol (LLDP)
  • Cisco Discovery Protocol (CDP)
  • Fast Link Pulses (FLP)
  • Internet Control Messaging Protocol (ICMP)
  • Dynamic Host Configuration Protocol (DHCP)

Power Over Ethernet Compatibility

  • Ethernet Alliance Certified to IEEE 802.3af/at/bt,
  • Hardware negotiation with signature resistance
  • Software negotiation with LLDP/CDP

Test Port

  • Shielded 8-Pin modular jack accepts 8-Pin modular (RJ45) plugs.

Commissioning Autotests

  • 10GBASE-T
  • 5GBASE-T
  • 2.5GBASE-T
  • 1000Base-T
  • 100Base-TX
  • 10Base-T

Cable Types

  • Balanced twisted-pair cabling
  • Unshielded twisted-pair
  • Screened twisted-pair
  • 2-pair and/or 4-pair

Wire Map-Only Tests

  • Document wire map
  • Length of each pair
  • Diagnose split pairs
  • User selectable T568A or T568B
  • User selectable crossover settings: Straight through, Half-crossover, Full-crossover

Length

  • 305 Meters

Documentation

Product Literature

show more