Images are representations only.
8012 Flowmeter with Paddle Wheel
Brand: Burkert Fluid Control Systems
The paddle wheel flowmeter for continuous flow measurement is especially designed for use with neutral, slightly aggressive, solid free liquids in its magnetic measuring version and for use with liquids which let pass the infra-reds in its optic measuring version.
The 8012 is made up of a fitting (S012) and an electronic module (SE12) which are connected together with screws.
The Burkert designed fitting system ensures simple installation into all pipes from DN06 to DN65. It can also be installed in fluid block systems.
The 8012 produces a configurable frequency pulse signal, proportional to the flow rate, which can easily be transmitted and processed by a Burkert remote transmitter/ controller, or a configurable switch output or a 4-20 mA signal.
Features
- Economic integration in pipe systems without any additional piping
- Optic or magnetic measuring principle
- Configurable output: 1 Analog 4-20 mA and/or 1 transistor output (frequency or switch)
- Outputs configurable (through interface on USB port with PC)
Specifications
Seal Material
- EPDM
- FKM (Wetted)
Housing Material
- PPS
Screw Material
- Stainless Steel A4
Fixed Connector Material
- Polyamide (PA)
Cable Gland
- PA with 1 m connected cable in PVC (on request)
Wetted Material
- Axis & Bearing: Ceramics (AL₂O₃)
- Fitting Body: 316L Stainless Steel, 1.4404, Brass, PVC, PP
Pipe Diameter
- DN 06 to DN 50 (DN 65 on request)
Measuring Range
- Flow Rate: 0.5 to 1,000 l/min (0.13 to 265 gpm)
- Flow Velocity: 0.3 to 10 m/s
Operating Voltage
- 12-36 Vdc ± 10 %, Filtered & Regulated
Current Consumption
- < 60 mA at 12 Vdc for Current Variant, without Load
Process Connection Material
- Metal
- Plastic
Measurement Deviation
- Teach-in: ± 1 % of the Measured Value at Teach-in Flow Rate Value
- Standard K Factor: ± 2.5 % of the Measured Value
Linearity
- ± 0.5 % of Full Scale
Repeatability
- ± 0.4 % of the Measured Value
Viscosity
- 300 cSt, Max.
Welded Connection
- DN 15 Weld End
- DN 20 Weld End
- DN 25 Weld End
- DN 32 Weld End
- DN 40 Weld End
- DN 50 Weld End
- DN 65 Weld End
Ambient Temperature
- Operating & Storage: -15° to 60° C (5° to 140° F)
Medium Temperature
- -15° to 100° C (5° to 212° F)
Fluid Pressure
- Plastic: max. PN 10 (145 PSI)
- Metal: max. PN 16 (232 PSI)
Humidity
- ≤ 80 % RH, Without Condensation
Approvals & Certifications
- PED
- FDA
- CE
Environmental Protection
- IP65
- IP67
