Images are representations only.
200 Direct-Acting 2/2-Way Miniature Solenoid Valve
Brand: Burkert Fluid Control SystemsType 200 is a direct-acting plunger type solenoid valve normally closed by spring action (circuit function A).
A diaphragm isolates the fluid from the solenoid system. When energized, the solenoid armature is drawn against a spring to open the valve.
The solenoid epoxy encapsulation efficiently dissipates the heat generated by the coil.
Features
- FKM or EPDM Separating diaphragm isolates solenoid system from operating fluid
- Compact design
- Specific testing and cleaning available
- Short response time
- Electrical connection: DIN-plug or leads
- Body material: Stainless steel
Specifications
Body Material
- Brass
Seat / Seal Material
- Seat: Stainless Steel
- Seal: NBR, FPM
Orifice Size
- 0.047" to 0.094" (1.2 to 2.4 mm) - Valve
Operating Voltages
- 12-24 Vdc
- 24-230 V / 50 Hz
Voltage Tolerance
- ± 10 % - Actuator
Power Consumption
- (AC Hold): 6 VA / 4 W
- (AC Inrush): 9 VA
- (DC): 4 W
Port Connection
- M5 Female
- G 1/8"
Gasket Material
- NBR
Kv Value Water
- 0.045 to 0.13 (m³/hour)
Ambient Temperature
- Maximum 55° C
Cycling Rate
- 1,000 c.p.m - Actuator
Duty Cycle
- 100 % Continuous Rated
Electrical Connection
- Cable Connection without cable plug (supplied as standard)
- 2 or 3 Moulded-in Flying Leads on request
- Moulded-in Cable on request
Response Time
- Closing: Approx. 8 ms
- Opening: 5 to 18 ms
Viscosity
- Maximum Approx. 21 mm2/s
- Laboratory Instruments
- Small-scale Instrument
- Gas Control Instruments
- Shut-off, Dosing, Filling, Ventilating
- Welding Technology
- Neutral Gases & Liquids
- Slightly Aggressive Liquids
- Pneumatic Control
- Vacuum
