Images are representations only.
2400 2/2-Way Solenoid Valve
Brand: Burkert Fluid Control SystemsThe servo-assisted Type 2400 valve has a servo-piston with a 2-way servo-control.
It is designed for high pressures. The speciality of this valve design lies in the layout of the seat and sealing element.
An additional radial seal make very good sealing possible. The tapered sealing element of the servo-control permits the switching of high pressure at relatively low coil power.
Features
- Push-over solenoid system
- Stainless steel body
Specifications
Body Material
- Stainless Steel
- Brass
- Brass, Nickel-Plated
Seal Material
- PEEK/FKM
- PCTFE/FKM
- PTFE/FKM
Valve Internal
- Stainless Steel
Environmental Protection
- IP65 with Cable Plug
Media
- Neutral Gases & Fluids
Media Temperature
- -10° to 80° C (14° to 176° F)
Viscosity
- 21 mm/sec
Cycling Rate
- ca. 80/Minute
Ambient Temperature
- Maximum 55° C
Electrical Contacts
- Normally Closed
- Normally Open
Duty Cycle
- 100 % Continuous Rating
Orifice Size
- 0.196" to 0.472" (5 to 12 mm)
Flow Rate
- Water: 0.6 to 2.6 Kv (m³/hour)
Electrical Connectors
- Cable Plug
Pressure Range
- AC - psi: 14.5 to 3,626 (kPa: 100 to 25,000, bar: 1 to 250)
- DC - psi: 14.5 to 3,046 (kPa: 100 to 21,000, bar: 1 to 210)
Operating Voltage
- 24 V / 220-230 V / 50 Hz
- 24 Vdc
Mounting Position
- Preferably with Actuator Upright
Port Connection
- G 1/2"
- G 1/4"
- G 3/8"
