Images are representations only.
MS03 Conductivity Sensor Cube
Brand: Burkert Fluid Control Systems
The device is a conductivity measurement sensor. It is used within the Online Analysis System Type 8905 by being plugged into a spare fluidic backplane slot.
The conductivity of water follows in general the content of dissolved substances in the water. Not only the absolute value at each moment is an indicator for the continuity of the water quality, but quick changes in the conductivity may indicate unwanted change in the water.
A rising or falling value can also be used as an indicator for process feedback in specific treatment steps. The device contains a 2-electrode sensor for resistive measurement of conductivity. The electrical and fluidic connections are made via the connection panel of the system.
The sensor cube is communicating via buS, so the recognition at the Online Analysis System is fully automatic. When plugging into a system you will find the sensor in the list of buS members for further customized adjustments.
Features
- Fully compatible with buS systems and a wide range of further analysis sensor cubes
- Resistive 2-electrode sensor
- Modular sensor cube for hot swap (exchange during operation)
- Minimal sample water flow needed
Specifications
Seal Material
- EPDM
Body Material
- PPE + PS
Lever
- Zamak, Painted
Measuring Range
- 50 to 5,000 µS/cm
- 0° to 50° C (32° to 122° F)
Measuring Deviation
- ± 2 % of Measured Value
Linearity & Repeatability
- ± 0.2 % of Full Scale
Measuring Range Resolution
- 0.01 µS/cm
- 0.01° C (0.018° F)
Approvals & Certifications
- CE
- EU Directives
- UL (C,US)
Operating Voltage
- 24 Vdc
Power Consumption
- 0.8 VA
Ambient Temperature
- Operating: 0° to 40° C (32° to 104° F)
- Storage: -10° to 60° C (14° to 140° F)
Humidity
- < 90 % RH, without Condensation
Process Connection
- Via pinch valve in the fluidic backplane of Type 8905
Media
- Water without particles: drinking water, industrial water
Fluid pH Range
- pH 4 to pH 9
Environmental Protection
- IP20
- IP65
