Images are representations only.
2875 2/2-Way Solenoid Control Valve
Brand: Burkert Fluid Control Systems
The direct-acting solenoid control valve Type 2875 is used as the regulating unit in control loops.
Due to an elastomeric seat seal the valve closes tight (integrated shut-off function), up to the DN specific nominal pressure, The plunger of the valve is assembled frictionless, which leads to an extraordinary adjustment characteristic.
This valve is particularly suitable for demanding control tasks (high control range, dry gases, etc.).
Valve control takes place through a PWM signal. The duty cycle of the PWM signal determines the coil current and hence the position of the plunger. Optionally the valve can also be driven with DC voltage.
Features
- Excellent range (1:200)
- Very good response
- Compact valve design
- Port connection 3/8” (9 mm) and 1/2” (13 mm)
Specifications
Seal Material
- EPDM
- FKM
Body Material
- Brass
- Stainless Steel
Duty Cycle
- 100 % Continuous Operation
Port Connection
- Sub-base, G 3/8", G 1/2", 3/8" NPT, 1/2" NPT
Approvals & Certifications
- ATEX
- IECEx
- UR
- USP
- FDA
Hysteresis
- < 5 %
Repeat Accuracy
- < 0.5 % Full Scale
Response Sensitivity
- < 0.25 % Full Scale
Setting Range
- 1:200
Actuating Time (10…90 %)
- < 25 ms
Media
- Neutral Gases & Liquids
Medium Temperature
- -30° to 90° C (-22° to 194° F)
Mounting Position
- Preferably with Actuator Upright
Orifice Size
- 2 to 9.5 mm
Operating Voltage
- 24 Vdc
Power Consumption
- 16 W
Maximum Coil Current
- 750 mA (at 16 W and 24 V coil)
PWM Frequency
- 900 Hz
Pressure Range
- psi: 0 to 362.6 (kPa: 0 to 2,500, bar: 0 to 25)
Flow Rate
- Water: 0.12 to 1.10 Kvs (m³/hour)
Ambient Temperature
- 55° C (131° F) - Max.
Electrical Connection
- Cable Plug Type 2518, form A according to DIN EN 175301 - 803
