Images are representations only.
8032/SE32 Flowmeter with Paddle Wheel
Brand: Burkert Fluid Control Systems
This intelligent flowmeter/transmitter/threshold detector with display is designed for use in clear, neutral or aggressive liquids and specially to switch a valve and to establish a monitoring system or an On/Off control loop. The switching points can be configured with the 3 keys below the display.
The 8032 compact version (SE32 transmitter + S030 sensor-fitting) is available with On/Off output or with process value output.
The remote version (SE32 transmitter) has a transistor output. The connection of the compact version to the process in the piping is done with standard INLINE sensor-fittings.
Features
- Indication, monitoring, transmitting and On/Off control in one device
- Selectable outputs (transistor or relay)
- Automatic calibration using Teach-In
- Process value output: 4-20 mA
- Flow threshold detector
Specifications
Wetted Material
- Axis & Bearing: Ceramics
- Sensor Armature: Brass, Stainless Steel, PVC, PP or PVDF
- Paddle Wheel: PVDF
- Sensor-fitting Body: Brass, Stainless Steel, PVC, PP or PVD
- Seal: FKM or EPDM
Non-Wetted Material
- Housing & Cover: PC, Glass Fibre Reinforced
- Female Cable Plug/Male Fixed Plug Body, contact holders and cable gland in PA; Cable gland seal and flat seal in NBR
- Screw: Stainless Steel
- Front Panel Film: Polyester
- Bayonet System: PC
- Fixed Connector: PA or PA and CuZn, Nickel-plated
Operating Voltage
- 12-36 VDC ± 10 %, Filtered & Regulated
Current Consumption
- ≤ 80 mA (No Load)
Measuring Range
- Flow Velocity: 0.3 to 10 m/s
- Flow Rate: 0.5 to 1,000 l/min (0.13 to 265 gpm)
Measuring Deviation
- Standard K-factor: ± 3 % of Measured Value
- Teach-In: ± 1 % of the Measured Value
Repeatability
- ± 0.4 % of the Measured Value
Linearity
- ± 0.5 % of Full Scale
Display
- 8-Digit LCD with Backlighting
Viscosity
- 300 cSt, Max.
Pipe Diameter
- 1/4 to 2-1/2" (DN 06 to DN 65)
Environmental Protection
- IP65
Electrical Connection
- Cable Plug
- Free Positionable 5-pin/8-pin M12 Male Connector
Ambient Temperature
- Operating & Storage: -10° to 60° C (14° to 140° F)
Humidity
- ≤ 80 % RH, Non-Condensing
Approvals & Certifications
- CE
- PED
- UL (C,US)
Medium Temperature
- PP: 0° to 80° C (32° to 176° F) - SE32
- PVC: 0° to 50° C (32° to 122° F) - SE32
- PVDF, Brass or Stainless Steel: -15° to 100° C (5° to 212° F) - SE32
