FLOWSIC100 Process Gas Flow Measuring Instrument

Brand: Sick AG

With the FLOWSIC100 Process gas flow measurement devices, measurements can be taken at pressures up to 16 bar – even in zone 2 explosive environments.

The sender/receiver units are available as hermetically sealed designs made of stainless steel or titanium.

The standard system contains an MCU control unit and 2 sender/receiver units or a single measuring probe.

The MCU is used for signal input and output and to calculate reference values (standardization) or mass flow.

It also serves as a user-friendly LCD interface.
  • Reliable and accurate measurement even at low gas velocities
  • Low-maintenance, as no moving parts
  • Measurement is independent of pressure, temperature, and gas composition
  • Does not affect gas flow, as non-contact measurement
  • Approved for use in zone 2 explosive environments (ATEX)
  • User-friendly operation and device diagnosis via MCU control unit and SOPAS ET operating software



Certifications & Approvals

  • CE
  • ATEX

Hazardous Area

  • 3G

Measured Value

  • Gas Velocity, Mass Flow Rate, Volumetric Flow a. c., Volumetric Flow s. c.
  • Sound Velocity
  • Gas Temperature

Gas Temperature

  • -40° to 260° C

Operating Pressure

  • -0.5 to 16 bar

Nominal Pipe Size

  • 0.15 to 1.7 m

Enclosure Rating

  • IP65


  • USB
  • RS-232 / RS-485
  • Ethernet
  • Modbus
  • HART
  • FOUNDATION Fieldbus

  • Natural Gas Industry
  • Chemical And Plastics-processing Industry
  • Glass Industry
  • Pharmaceutical Industry
  • Petrochemical Plants And Refineries
  • Cement Production
  • Steel And Iron Production
  • Food Industry
show more