Images are representations only.
G2 Series Intrinsically Safe Turbine Meters
Brand: FLOMECA full line of FLOMEC® G2 Series Turbine Meters are available in a variety of housing materials.
Rugged and dependable.
Features- Stainless Steel for Most Water and Chemical Products
- Aluminum for Fuels And Petroleum-based Products
- PVDF for Aggressive Chemicals
- Meter Is Designed for Thin Fluids < 100 cP
- Modular Design Allows for Use with Output Modules, Sensors and Remote Display Kits
- 2 Totals: Batch Total = Resettable, Total = Non-resettable; Rate of Flow, Factory Calibrated in Gallons or Litres. Field Calibratable. Includes Non-volatile Totals.
- High Accuracy Meter
- Internal Parts are Simple to Replace for Easy Maintenance
- AAA Alkaline Battery Life: 2 Years
Specifications
Brand
Fitting Type
- NPT or ISO (Female) BSPT (ISO 7 designation is RC)
- 150# ANSI (S10, S15 y S20 only)
- Tri-Clamp (Stainless Steel only) - Fitting size is one size bigger than meter size
Meter Sizes Available
- 1/2”
- 3/4”
- 1”
- 1-1/2”
- 2"
Corresponding Tri-Clamp Fitting
- 1/2": 3/4"
- 3/4": 1”
- 1": 1-1/2”
- 1-1/2": 2”
- 2": 2-1/2”
Housing Material
- 316 Stainless Steel
- Aluminum
- PVDF
Repeatability
- ± 0.1%
- PVDF is ± 0.3%
Pressure Rating
- Stainless Steel 316 SS: 1,500 psi (102 bar)
- Aluminum: 300 psi (21 bar)
- ANSI Flange 316 SS: Flange Rule
- Sanitary Flange 316 SS: Limited by fitting, clamp size, & temperature
- PVDF: 100 psi (6.9 bar)
Operating Temperature Range
- -40° F to 250° F (-40° C to 121° C)
- PVDF: -20° F to 180° F (-28° C to 82° C)
Operating Temperature Range with Intrinsically Safe Display
- 0° F to +129° F (-18° C to +54° C)
Typical K-Factor
- 1/2" (05): 2,500 PPG (660 Pulses/L)
- 3/4" (07): 1,100 PPG (291 Pulses/L)
- 1" (10): 565 PPG (149 Pulses/L)
- 1-1/2" (15): 215 PPG (57 Pulses/L)
- 2" (20): 100 PPG (26 Pulses/L)
Wetted Materials
- Housing: 316 Stainless Steel or Aluminum
- Bearings: 96% Alumina Oxide Ceramic
- Shaft: Tungsten Carbide
- Rotor: PVDF
- Rings: 316 Stainless Steel
Wetted Materials PVDF
- Housing: PVDF (15% Carbon Fiber Filled)
- Bearings and Shaft: 98% Alumina Ceramic
- Rotor: PVDF
- Rings: Fluorocarbon (Optional PTFE)
Frequency Range
- 1/2" (05): 42-420 Hz @ 1-10 GPM (3.8-38 L/min) / 45-450 Hz @ 1.2-12 GPM (4.5-45 L/min) (PVDF)
- 3/4" (07): 37-370 Hz @ 2-20 GPM (7.6-76 L/min)
- 1" (10): 47-470 Hz @ 5-50 GPM (19-190 L/min) / 45-475 Hz @ 5-50 GPM (19-190 L/min) (PVDF)
- 1-1/2" (15): 36-360 Hz @ 10-100 GPM (38-380 L/min)
- 2" (20): 33-330 Hz @ 20-200 GPM (76-760 L/min)
Calibration Report
- Comes standard with G2 Series meters.
- N.I.S.T. – Certification available.
- Batching
- Blending
- Water
- Industrial Fluids
- Plating Solutions
- Ammonium
- Food and Beverage Processing
- Fuel Products
- Monitoring Clean Fluids
- Plant Process Water
- Chemical Feed Lines
- Harsh Chemicals:
- Sulfuric Acid
- Bleach
- DEF - Diesel Exhaust Fluid
