G2 Series Safe Area Only Turbine Meters

Brand: FLOMEC

A full line of FLOMEC® G2 Series Turbine Meters are available in a variety of housing materials.

Rugged and dependable.
Features
  • Stainless Steel for Most Non-volatile Products
  • Aluminum for Fuels And Petroleum-based Products
  • PVDF for Aggressive Chemicals
  • Meter Is Designed for Thin Fluids < 100 cP
  • Modular Design Allows for Use with Output Modules, Sensors and Remote Display Kits
  • 2 Totals: Batch Total = Resettable, Total = Non-resettable; Rate of Flow, Factory Calibrated in Gallons or Litres. Field Calibratable. Includes Non-volatile Totals.
  • High Accuracy Meter
  • Internal Parts are Simple to Replace for Easy Maintenance
  • AAA Alkaline Battery Life: 2 Years
  • High Temperature Local Display Option for Stainless Steel Meters Only - 185° F/85° C

Specifications

Brand

Fitting Type

  • NPT or ISO (Female) BSPT (ISO 7 designation is RC)
  • Tri-Clamp (Stainless Steel only) - Fitting size is one size bigger than meter size
  • 150# ANSI (S10, S15 & S20 only)

Meter Sizes Available

  • 1/2”
  • 3/4”
  • 1”
  • 1-1/2”
  • 2"

Corresponding Tri-Clamp Fitting

  • 1/2": 3/4"
  • 3/4": 1”
  • 1": 1-1/2”
  • 1-1/2": 2”
  • 2": 2-1/2”

Housing Material

  • 316 Stainless Steel
  • Aluminum
  • PVDF

Repeatability

  • ± 0.1%
  • PVDF is ± 0.3%

Pressure Rating

  • Aluminum: 300 psi (21 bar)
  • ANSI Flange 316 SS: Flange Rule
  • Sanitary Flange 316 SS: Limited by fitting, clamp size, & temperature
  • PVDF: 100 psi (6.9 bar)
  • Stainless Steel 316 SS: 1,500 psi (102 bar)
  • High Pressure 316 SS: 3000 psi (207 bar)

Operating Temperature Range

  • -40° F to 250° F (-40° C to 121° C)
  • PVDF: -20° F to 180° F (-28° C to 82° C)

Operating Temperature Range with Display

  • 0° F to 140° F (-18° C to 60° C)

Operating Temperature Range with High Temperature Riser H9

  • 0° F to 185° F (-18° C to 85° C)
  • See Temp. Chart in Q9 Non-Agency Manual

Typical K-Factor

  • 1/2" (05): 2,500 PPG (660 Pulses/L)
  • 3/4" (07): 1,100 PPG (291 Pulses/L)
  • 1" (10): 565 PPG (149 Pulses/L)
  • 1-1/2" (15): 215 PPG (57 Pulses/L)
  • 2" (20): 100 PPG (26 Pulses/L)

Wetted Materials

  • Housing: 316 Stainless Steel or Aluminum
  • Bearings: 96% Alumina Oxide Ceramic
  • Shaft: Tungsten Carbide
  • Rotor: PVDF
  • Rings: 316 Stainless Steel

Wetted Materials PVDF

  • Housing: PVDF (15% Carbon Fiber Filled)
  • Bearings and Shaft: 98% Alumina Ceramic
  • Rotor: PVDF
  • Rings: Fluorocarbon (Optional PTFE)

Frequency Range

  • 3/4" (07): 37-370 Hz @ 2-20 GPM (7.6-76 L/min)
  • 1-1/2" (15): 36-360 Hz @ 10-100 GPM (38-380 L/min)
  • 2" (20): 33-330 Hz @ 20-200 GPM (76-760 L/min)
  • 1/2" (05): 42-420 Hz @ 1-10 GPM (3.8-38 L/min) / 45-450 Hz @ 1.2-12 GPM (4.5-45 L/min) (PVDF)
  • 1" (10): 47-470 Hz @ 5-50 GPM (19-190 L/min) / 45-475 Hz @ 5-50 GPM (19-190 L/min) (PVDF)

Calibration Report

  • Comes standard with G2 Series meters.
  • N.I.S.T. – Certification available.

  • Batching
  • Blending
  • Water
  • Industrial Fluids
  • Plating Solutions
  • Ammonium
  • Food and Beverage Processing
  • Fuel Products
  • Monitoring Clean Fluids
  • Plant Process Water
  • Chemical Feed Lines
  • Harsh Chemicals:
    • Sulfuric Acid
    • Bleach
show more