Images are representations only.
Type S054 Magnetic Inductive Sensor with Wafer Connection
Brand: Burkert Fluid Control Systems
The type S054 magnetic inductive flow sensor is recommended for liquids with a minimal conductivity and applications with requirements in areas of water measurements.
When combined with the SE58 M or SE58 L transmitters (minimum required conductivity: 5 µS/cm) it builds a flow measurement device with different performance, functions, materials and approvals with an appropriate suitability for the respective application depending on the individual requirements.
With the SE58 M and SE58 L compact devices or remote versions are created for which the transmitter and sensor are connected by 2 cables up to a maximum length. Standard process connections available for the S054 are wafer connections.
When connected to an actuator such as a valve, the S054 sensor in combination with the SE58 L transmitter can also be used to control high-precision filling operation.
Features
- For connection to a type SE58 transmitter (with display, in compact or remote version) for flow measurement
- Variant mainly for use in applications with water
- Flow measurement 25... approx. 75,000 l/min for DN 25... DN 400
Specifications
Sensor Housing
- Carbon Steel Painted (Stainless Steel 304 or 316 on Request)
Junction Box
- For Remote Sensor: Painted Aluminium (on request: stainless steel 304 (1.4301) raw or polished)
Wetted Material
- Electrode: 316L Stainless Steel
- Electrode: Alloy C276, Titanium, Tantalum, Platinum-Rhodium on Request
- Seal: FKM (EPDM on request) with PP Lining
- Lining: PTFE on request
- Lining: PP or Ebonite (Hard Rubber)
Pipe Diameter
- DN 25 to DN 200
Measuring Range
- 0 to 0.72 m³/h Up to 0 to 1,130 m³/h
Certifications & Approvals
- CE
- IEC/EN
Humidity
- ≤ 90 %, without Condensation
Fluid Temperature
- - 20° to 110° C (- 46 to 230° F)
Fluid Pressure
- PN 16 (232 PSI) with PP or ebonite lining
- PN 40 on request, only with PTFE lining up to DN 150
Minimum Conductivity
- 5 µS/cm (or 20 µS/cm with demineralised water)
Pipe Connection
- Wafer
Electrical Connection
- 2 Cable Glands PG9 (for remote variant of the sensor)
