Images are representations only.
8041 Electromagnetic Flow Transmitter
Brand: Burkert Fluid Control Systems
The electromagnetic flow transmitter 8041 has been designed for pipes with diameters ranging from 1/4" to 16" and liquids having a conductivity > 20 µS/cm.
The transmitter is a magmeter made up of an electronic module and a sensor which armature is in PVDF or stainless steel. It is fitted with a 4-20 mA output, a pulse rate output and a relay output.
The different parameters can be programmed by means of 5 switches, a push-button and a 10 led bargraph. The version with a stainless steel sensor can be used in applications with higher pressures (232 psi) and higher temperatures 150° C (302° F).
Features
- Sensor in solid state technology
- Working as a transmitter and/or as an On/Off controller
- Automatic-calibration of full scale: Teach-In
- Clean in place (CIP)
- FDA approved
Specifications
Wetted Material
- Sensor Armature: 316L Stainless Steel, 1.4404, PVDF
- Clamp Connection: Stainless Steel 1.4404/316L
- Electrode & Earth Ring: Stainless Steel 1.4404/316L, Alloy C22
- Electrode Holder: PEEK (conform to FDA)
- Seal: FKM, EPDM, FEP
Non-Wetted Material
- Housing, Cover & union Nut: PC, Back PPA (Glass Fibre Reinforced)
- Seal: NBR
- Front Panel Film: Polyester
- Mounting Ring: Polysulphone, glass fibre reinforced
- Armature: Stainless Steel 1.4404/316L
- Cable Gland: PA with neoprene seal
Pipe Diameter
- 1/4 to 16" (DN 06 to DN 400)
Measuring Range
- Flow Velocity: 0.2 to 10 m/sec
- Flow Rate: 0.4 to 75,000 l/min
Measurement Deviation
- Standard K-factor: ± 3.5 % of the Measured Value
- Teach-In: ± 0.5 % of the Measured Value
Linearity
- ± 0.5 % of Full Scale
Repeatability
- ± 0.25 % of the Measured Value
Operating Voltage
- 18-36 Vdc ± 0.5 %, Filtered & Regulated (3-Wires)
Current Consumption
- ≤ 220 mA (at 18 Vdc)
Approvals & Certifications
- CE
- PED
- FDA
- UL
Electrical Connection
- Cable Glands M20 x 1.5
Environmental Protection
- IP65
Medium Temperature
- PVDF: 0° to 80° C (32° to 176° F)
- Stainless Steel: -15° to 150° C (5° to 302° F)
Ambient Temperature
- Operating: -10° to 60° C (14° to 140° F)
Storage Temperature
- -20° to 60° C (-4° to 140° F)
Humidity
- < 80 % RH, Non-Condensated
Fluid Pressure
- Max. PN 10 (145.1 PSI) or Max. PN 16 (232.16 PSI)
