Images are representations only.
8007 Flowmeter
Brand: Burkert Fluid Control Systems
This flowmeter series is made for the measurement of especially large flow rates and use the calorimetric measuring principle.
A heated sensor element is cooled down by the gas flow. This cooling effect which depends on the flow velocity and the gas characteristics serves as a flow indication, the kind of cooling directly depends on the flow velocity and the kind of gas. This kind of mass flow measurement is independent of pressure and temperature.
The flowmeter can be used for monitoring air supplies, but also qualifies for the measurement of other gases, see technical data.
Type 8007 is available in two versions:
- Standard
- Heavy duty (with robust diecast electronic housing
In the heavy duty version the sensor is encapsulated in stainless steel.
Features
- Depth scale for accurate installation in existing pipes
- Usable in pipes from 1/2" up to 12" (DN 300)
- Standard variant and heavy duty variant available
- Integrated display
Specifications
Seal Material
- FKM (for Oxygen)
- NBR
Body Material
- Standard: 304 Stainless Steel, 1.4301
- Heavy Duty: 316Ti Stainless Steel, 1.4571
Electronics Housing
- Standard: Polycarbonate
- Heavy Duty: Die-cast Aluminium
Operating Pressure
- Standard: Max. 16 bar
- Heavy Duty: Max. 50 bar
Accuracy
- ± 0.3 % of Full Scale
- ± 1.5 % of Reading
Communication
- Modbus RS485/RTU
Output Signal
- 4-20 mA
Environmental Protection
- IP65
Power Supply
- 18-36 Vdc, 5 W
Probe Length
- 8.6" (220 mm) Standard
Ambient Temperature
- -30° to 80° C (-22° to 176° F)
Output Load
- Maximum 500 Ω
Port Connection
- G 1/2"
Media
- Air
- Argon
- Methane
- Natural Gas
- Nitrogen
- Oxygen
Medium Temperature
- Gas: -30° to 110° C (-22° to 230° F)
