Images are representations only.
Fluke FEV100 Electric Vehicle Charging Station EVSE Test Adapter
Brand: Fluke CorporationTest the safety and performance of a type 1, level 1 or level 2 electric vehicle ac charging stations (EVSEs) with the Fluke FEV100.
This test adapter simulates the presence of an electrical vehicle, allowing you to conduct tests in combination with appropriate test instruments such as a digital multimeter or oscilloscope.
Use the FEV100 to verify an EVSE is working properly after install and during periodic maintenance, or troubleshoot an EVSE if it is not delivering the appropriate charge.
EVSE charging cables may become damaged over the course of use, increasing electric shock risks to users.
Stay protected from and check risk of electric shock with the GFCI trip test.
This function verifies the breaker of the EVSE is connected by detecting ground faults.
Additionally, the PE grounding protection pre-test verifies that there is no presence of dangerous voltage at the ground terminal.
Features- Check protective earth for correct wiring and functioning with the PE pre-test feature.
- Perform GFCI troubleshooting of EVSE and verify operation within safety standards.
- Test charging states of EVSE with CP state simulation.
- Verify charging voltage and maximum available current using a multimeter.
- SAE J1772 compliant to North American standards.
Specifications
Brand
Input Voltage
- UL1/N = 120 V, UL2/N = 120 V, UL1/L2 = 208 V, 60 Hz (three-Phase system) or UL1/N = 120 V, UL2/N = 120 V, UL1/L2 = 240 V, 60 Hz (single-Phase system), ± 10 % voltage fluctuations from nominal
EV Connector
- SAE J1772 socket, 16 A
Operating Temperature
- -4° F to 104 °
- -20° C to 40° C
Operating Humidity Range
- 10 % to 85 % Relative Humidity non-condensing
Safety Standards
- IEC 61010-1, Pollution Degree 2
- IEC 61010-2-030
Measurement Category
- CAT II 250 V
IP Protection Class
- IP54
