Images are representations only.
Type AC10 Solenoid Coil
Brand: Burkert Fluid Control SystemsThe solenoid coil type AC10 is an electromagnetic valve actuator for various Bürkert valves. As a so-called top-mounted coil, it is separated 100 % from the valve. The valve is a closed system even if the coil is
removed.
Features
- Two windings encapsulated in one coil with epoxy
- Inrush power increases performance and differential pressure range for small installation volumes
- Holding power reduces to less than 1 W with over 80 % energy saved
- Less heating reduces calcification and increases service life
- Internal electronics assembly covers direct and alternating voltage with frequencies 50 Hz and 60 Hz
Specifications
Certifications & Approvals
- IECEx
- CE
- ATEX
- cULus
- cRUus
Ambient Temperature
- -40° to 60° C
Materials of Construction
- Seal: FKM
- Coil: Epoxy
Switching Frequency
- Max. 30 cycles/min
Operating Voltage
- 24 V 50/60 Hz
- 24 VDC, 110/120 V 50/60 Hz, 230/240 V 50/60 Hz
Duty Cycle Single Valve
- 100 % continuous operation
Voltage Tolerance
- ± 10 %
Environmental Protection
- IP65, IP67
Documentation
Product Manuals
- AC10 FM Division 1 US/CA V2.0 Additional Manual pdf 238 KB
- AC10 Solenoid coil-ATEX/IECEX/UL, Kat.3/Div.2 operating Instructions pdf 992 KB
- Type AC10 EPS 18 ATEX 1232 X, v2.0 Operating Instructions pdf 1.9 MB
- Type AC10 | EPS 18 ATEX 1088 X Operating Instructions pdf 883 KB
- Type AC10 HazLoc, Zone 1/21 and Class I, II, III Div 2 Listing Operating Instructions pdf 1.8 MB
