Images are representations only.
6510/6511 Multi-Way Valve for Pneumatic
Brand: Burkert Fluid Control Systems
Types 6510/6511 Ex are with high switch reliability diaphragm valves in 3/2 and 5/2 way versions. The valve consists of a diaphragm reinforcement as main valve and a 10 mm rocker solenoid valve with DC-coil as pilot.
The valve module system is suitable for a wide variety of complex control applications, with the logical, modular construction in respect of its electrical and fluid interfaces.
Types 6510 and 6511 are expandable and preferably suitable for valve blocks with plug connection at the back, or in front by easily turning the pilot valve 180°.
The electrical connections can be made either via common connections, Multipole or field bus interfaces.
Features
- EEx-ia-II C T6 approval
- Optimal system solutions due to the high level of modularity
- Long service life even with non-lube conditions
- Pre-tested and supplied "easy to connect"
- No individual valve wiring
- Separate electrical circuits for the electronics and the valves
- Field bus compatible
- Low installation costs
- Corrosion resistant
Specifications
Seal Material
- FPM
- NBR
Body Material
- Polyamide (PA)
- PPS
Operating Voltage
- 24 Vdc
Voltage Tolerance
- ± 10 %
Nominal Power
- 0.8 W
Orifice Size
- 2.5 mm
Pressure Range
- 2.5 to 10 bar
Duty Cycle
- 100 % Continuous operation
Switching Time
- Closing: < 10 ms
- Opening: < 15 ms
Port Connection
- Flange for MP01
Flow Rate
- 130 L/minute
Media
- Lubricated or Oil-free Compressed Dry Air
- Neutral Gases (5 μm filter recommended)
Medium Temperature
- 0° to 50° C (32° to 122° F)
Ambient Temperature
- 0° to 55° C
Environmental Protection
- IP40
Approvals & Certifications
- IECEx
- ATEX
- cURus
Electrical Connection
- Rectangular plug, 2-pin, with raster 5.08 mm
Mounting Position
- Preferably with Actuator System Upright
