Images are representations only.
Series SBLT2 & SBLTX Submersible Level Transmitter
Brand: Dwyer Instruments, LLCThe Series SBLT2 & SBLTX Submersible Level Transmitters are manufactured for years of trouble free service.
These series measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a 316 SS housing.
Features- Slim design for tight applications with bullet nose design which protects the diaphragm from damage
- Incorporates lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty) on SBLT2 models
- Maintenance free filter eliminates particulate or water droplets from entering the transducer
- UL approved intrinsically safe on SBLTX models for use in hazardous locations when used with proper barrier
- Excellent chemical compatibility
- 270 lb tensile strength shielded and vented cable
- NPT connection allows the unit to be rigidly installed in a pipe/conduit, or the addition of a A-625 hanging loop for attaching a chain for pulling out of the installation
- Standard 72 hour lead time ensures minimal downtime
Specifications
Accuracy
- ± 0.25 % of Full Scale
Approvals & Certifications
- CE
- cUL
Cable Length
- 16.40 feet (5 metres)
- 32.81 feet (10 metres)
- 40 to 59.06 feet (12.2 to 18 metres)
- 59.06 feet (18 metres)
- 60 feet (18.3 metres)
Cable Material
- ETFE
- Polyurethane
Compensated Temperature
- -18° to 80° C (0° to 176° F)
Electrical Connectors
- Wire Pigtail
Electrical Protection
- Lightning & Surge Protection - SBLT2
Enclosure, Body Material
- 316 Stainless Steel
Environmental Protection
- Class 1, Div. 1, Groups B, C, D
- Class II, Div. 1, Groups E, F, G
- Class III, Div. 1, Hazardous Location
- Intrinsically Safe
Loop Resistance
- 900 ohms at 30 Vdc, Max.
Media
- Compatible Liquids
NPT Connection
- 1/2” NPT Male
Output
- 4-20 mA, 2-Wire Loop Powered
Power Requirement
- 10-28 Vdc
- 13-30 Vdc
Pressure Range
- bar: 0.3 to 1.7
- kPa: 34.4 to 176
- psi: 5 to 25.58
Response Time
- 50 milliseconds
Temperature Effect
- ± 0.02 % of Full Scale/°F
Temperature Range
- -18° to 80° C (0° to 176° F)
Vent Connection Style
- Tube Fitting
Wetted Materials
- 316 Stainless Steel
- 316L Stainless Steel
- Epoxy
- PVC
- Well Monitoring
- Ground Water Monitoring
- Environmental Remediation
- Surface Water Monitoring
- Down Hole
- Water Tanks
